PRODUCTS

NEMA 4 JIC Hinge Cover Flanged Lay-in Wireway

PRODUCT OVERVIEW


Application

EPI NEMA 4 JIC Flanged, Hinge Covered Lay-in Wireway is designed to protect electrical wiring in areas, which may be regularly hosed down or are very wet. Suitable for use outdoors, or in dairies, breweries, and similar installations. This design allows for wire and cable to be installed by “laying-in” rather than by pulling-through the wire. A complete selection of sections and ings are available in 4X4, 6X6, 8X8, 10X10, and 12X12 sizes.

Construction

Made from 16 or 14-gauge galvanized steel. The end flanges are made from 12-gauge steel. All seams are continuously welded and there are no holes or knockouts. All sections and ings have smooth rounded edges to prevent damage to insulation. The covers have a gasket with an oil-resistant adhesive(Covers not to exceed 72”). Stainless steel butt hinges and external stainless steel screw clamps assure a complete seal between covers and bodies. A solid oil-resistant gasket is positioned between flanges when sections and ings are bolted together.

Finish

The standard finish is Sherwin Williams ANSI-70 light-dove gray inside and out. Clamps and screws are stainless steel. Additional finishes are available.

Industry Standard

Meets National Electrical Manufacturers Association (NEMA) standard for Type 4 (Water Tight and Dust Tight), Type 12 (Industrial Use), and Type 13 (Oil Tight and Dust Tight) enclosures. Also, conforms to the Joint Industrial Council (JIC) EGP- 1-1967.


Standard Sizes

Width Height Depth Gauge
4 4 12 16
4 4 24 16
4 4 36 14
4 4 48 16
4 4 60 16
4 4 72 16
4 4 96 15
4 4 120 16
6 6 12 16
6 6 24 16
6 6 36 16
6 6 48 16
6 6 60 16
6 6 72 16
6 6 96 16
6 6 120 16
8 8 12 14
8 8 24 14
8 8 36 14
8 8 48 14
8 8 60 14
8 8 72 14
8 8 96 14
8 8 120 14
10 10 12 14
10 10 24 14
10 10 36 14
10 10 48 14
10 10 60 14
10 10 72 14
10 10 96 14
10 10 120 14