PRODUCTS

Application

EPI NEMA Type 4X Single Door Freestanding Enclosures are designed to house electrical controls, terminals, and instruments in areas that may be regularly hosed down or where serious corrosion problems exist. For use outdoors, or in dairies, breweries, plants, sewage plants, food processing areas, packing plants, and similar installations.

Construction

Made from 14, 12, or 10-gauge stainless steel (Type 304 2B) with strong, rigid construction. Seams are continuously welded and there are no holes or knockouts. Clamps are provided on three sides of the door to ensure a watertight seal with neoprene gaskets. Gaskets are aTTached with an oil-resistant adhesive. Exterior hardware (such as clamps, clamp screws, hinge pins, etc.) is stainless steel. A heavy-gauge continuous stainless steel hinge supports the door. A lip is provided around three sides of the door to increase strength and keep dirt and liquids from dropping into the enclosure. A hasp and staple are provided for padlocking.

Accessories

Panels must be ordered separately. Floor stand kits in 6, 12, 18, and 24-inch heights are available for factory installation on all single door NEMA 4X enclosures. Drip shield kits protect the door hardware from dripping water and seTTling dust.

Finish

These enclosures are unpainted. A Type 316 SS is also available. Panels are painted Sherwin Williams ANSI-70 enamel.

Industry Standard

Meets National Electrical Manufacturers Association (NEMA) standard for Type 4 (Water Tight and Dust Tight), Type 4X (Water Tight, Dust Tight, and Corrosion Resistant), Type 12 (Industrial Use), and Type 13 (Oil Tight and Dust Tight) enclosures. JIC standard EGP-1-1967.