NEMA Type 4X Enclosures

NEMA Type 4X Double Door Enclosure




EPI NEMA Type 4X Double Door Stainless Steel Enclosures are designed to house electrical controls, terminals, and instruments in areas which may be regularly hosed down or where serious corrosion problems exist. Suitable for use outdoors, or in dairies, breweries, petrochemical plants, sewage plants, food processing areas, packing plants, and similar installations.


Made from 14 or 12-gauge stainless steel (Type 304 2B) and have strong and rigid construction. All seams are continuously welded. There are no holes or knockouts. A lip is provided on all three sides of the door, preventing dirt and liquid from dropping into the enclosure. Stainless steel door clamps are provided on three sides of each door to ensure a watertight seal with oil resistant gaskets. A heavy gauge stainless steel continuous stainless steel hinge supports each door. A center post is installed for increased rigidity. A hasp and staple are provided on each door for padlocking


These enclosures are unpainted. A Type 316 SS is also available. Panels are painted with Sherwin Williams ANSI-70 light-dove gray enamel.

Industry Standard

Meets National Electrical Manufacturers Association (NEMA) standard for Type 4 (Water Tight and Dust Tight), Type 4X (Water Tight, Dust Tight, and Corrosion Resistant), Type 12 (Industrial Use) and Type 13 (Oil Tight and Dust Tight) enclosures. JIC standard EGP-1-1967.

Width Height Depth Gauge
48 60 18 12
48 72 18 12
60 72 18 12
72 72 18 12
72 90 20 12
48 72 24 12
60 72 24 12
72 72 24 12
72 90 24 12
60 72 36 12
72 90 36 12


NEMA Type 4X Double Door Enclosure

NEMA Type 4X Double Door Enclosure