PRODUCTS
PRODUCT OVERVIEW
Application
EPI NEMA Type 4 Double Door Wall Mount Enclosures designed to house electrical controls, terminals, and instruments in areas, which may be regularly hosed down or are in very wet environments.
Construction
Made from 14 or 12-gauge galvanized steel. All seams are continuously welded. There are no holes or knockouts. A lip is provided on all three sides of the door to ensure a watertight seal with oil-resistant neoprene gaskets. The door clamps are quick and easy to operate and have no loose parts. Exterior clamps, clamp screws, and hinge pins are stainless steel. A hasp and staple are provided for padlocking. A center post is provided for extra rigidity. External feet are provided for mounting. Mounting brackets are provided for the optional mounting panel, otherwise not installed.
Accessories
Panels must be ordered separately.
Finish
The standard finish is Sherwin Williams ANSI-70 Light Dove Gray enamel finish inside and out. Other finishes are available for specific applications.
Industry Standard
Meets National Electrical Manufacturers Association (NEMA) standard for Type 4 (Watertight and Dust-tight) and Type 13 (Industrial use) enclosures.
Standard Sizes
Width | Height | Depth | Gauge |
---|---|---|---|
42 | 24 | 8 | 14 |
48 | 24 | 8 | 14 |
42 | 30 | 10 | 14 |
48 | 30 | 10 | 12 |
60 | 30 | 10 | 12 |
42 | 36 | 12 | 12 |
42 | 42 | 12 | 12 |
48 | 36 | 12 | 12 |
48 | 42 | 12 | 12 |
48 | 48 | 12 | 12 |
60 | 36 | 12 | 12 |
60 | 42 | 12 | 12 |