NEMA 4X JIC Wireways
NEMA 4X JIC Hinge Cover Flanged Lay-in Wireway
EPI NEMA 4X JIC, Flanged, Hinge Covered, Lay-in Wireway is designed to protect electrical wiring in areas, which may be regularly hosed down or are very wet. Designed for use in areas where serious corrosion problems exist. Suitable for use outdoors, or in dairies, breweries, petrochemical plants, food processing plants, sewage plants, water treatment plants, packing plants, and similar installations. This design allows for wire and cable to be installed by “laying-in” rather than by pulling through the wire. A complete selection of sections and ings is available in 4X4, 6×6, 8×8, 10×10, and 12×12 sizes.
Made from 16 or 14-gauge stainless steel (Type 304 2B). The end flanges are made from 12-gauge stainless steel. All seams are continuously welded and there are no holes or knockouts. All sections and ings have smooth rounded edges to prevent damage to insulation. The covers have oil resistant gasket with oil resistant adhesive. Stainless steel bu hinges and external stainless steel screw clamps assure a complete seal between covers and bodies. A solid Oil-resistant gasket is positioned between flanges when sections and ings are bolted together.
The standard finish is Type 304 2B Stainless Steel. All corners are ground smooth, polished and free of sharp edges. Type 316 Stainless Steel is also available.
Meets National Electrical Manufacturers Association (NEMA) standard for Type 4 (Water Tight and Dust Tight), Type 4X (Water Tight, Dust Tight, and Corrosion Resistant) and Type 12 (Industrial Use) enclosures. Also, conforms to the Joint Industrial Council (JIC) standard EGP-1-1967.