PRODUCTS

NEMA 4 JIC Hinge Clamp Cover Enclosure

PRODUCT OVERVIEW


Application

EPI NEMA 4 JIC Continuous stainless steel hinge, Clamp Cover Enclosures are designed for use in areas that may be regularly hosed down or are very wet. They are suitable for use in dairies, breweries, and similar installations.

Construction

Made from 16 or 14-gauge galvanized steel. There are no knockouts or holes. External screw clamps are provided on three sides of the cover for securing the gasketed cover. The screw clamps and clamp screws are made of stainless steel and are quick and easy to operate. There are no loose parts. A continuous stainless steel hinge is provided. External feet are furnished for mounting.

Accessories

Panels must be ordered separately. Provisions for padlocking and other hardware can be provided if specified.

Finish

The standard finish is Sherwin Williams ANSI-70, light dove gray enamel inside and out. Additional finishes can be provided

Industry Standard

Meets National Electrical Manufacturers Association (NEMA) standard for Type 4 (Water Tight and Dust Tight), Type 12 (Industrial Use), and Type 13 (Oil Tight and Dust Tight) enclosures. Also, Meets Joint Industrial Council (JIC) standard EGP- 1-1967.


Standard Sizes

Width Height Depth Gauge
4 4 4 16
4 6 4 16
6 6 4 16
6 8 4 14
6 12 4 14
8 8 4 14
8 10 4 14
6 8 6 14
8 10 6 14
10 10 6 14
10 16 6 14
12 12 6 14
12 14 6 14
14 16 6 14
10 12 8 14
12 14 8 14
14 16 8 14
14 16 10 14