PRODUCTS

NEMA Type 12 Wall Mount Enclosure

PRODUCT OVERVIEW


Application

EPI NEMA Type 12 Wall Mount Enclosures are designed to house electrical controls, terminals, and instruments. They provide protection from dust, dirt, oil, and water in indoor use.

Construction

Made from 14, 12, or 10-gauge steel. All seams are continuously welded. There are no holes or knockouts. The neoprene door gasket is attached with an oil-resistant adhesive. The door clamps are quick and easy to operate and have no loose parts. Uses continuous stainless steel hinge to secure door. A hasp and staple are provided for padlocking. Body stiffeners and door stiffeners are provided in larger enclosures for extra rigidity. External feet are furnished for mounting.

Accessories

Panels must be ordered separately. Floor stand kits in 6, 12, 18, and 24-inch heights are available for factory installation on all single door NEMA 12 enclosures. Drip shield kits protect the door and the door hardware from dripping water and settling dust.

Finish

The standard finish is a Sherwin Williams ANSI-70, light dove gray, inside and out. Panels are the same.

Industry Standard

Meets National Electrical Manufacturers Association (NEMA) standard for Type 12 (Industrial Use) enclosures.


Standard Sizes

Width Height Depth Gauge
12 16 6 16
16 16 6 16
16 20 6 14
16 24 6 14
20 20 6 14
20 24 6 14
20 30 6 14
24 24 6 14
24 30 6 14
24 36 6 14
12 16 8 16
16 20 8 14
16 20 8 14
20 20 8 14
20 24 8 14
20 30 8 14
24 30 8 14
24 36 8 14
30 30 8 14
30 42 8 14
16 20 10 14
20 24 10 14
24 30 10 14
30 36 10 14
30 48 10 14
36 48 10 14
36 60 10 14
16 20 12 14
20 24 12 14
24 24 12 14
24 30 12 14
24 36 12 14
30 30 12 14
30 36 12 14
30 42 12 14
30 72 12 14
36 36 12 14
36 42 12 14
36 48 12 14
30 36 16 14
36 48 16 14