PRODUCTS
PRODUCT OVERVIEW
Application
EPI Medical Duct Type 1 Screw-Cover Wall ducts are designed to house electrical wiring to be installed in and on walls and ceiling areas for medical operatories. The wall duct provides complete lay-in features in straight sections and accessories. Fi ings are available for transitions to trench duct in the floor. Cover plates are installed on all sections and fittings. A complete selection of sections and in fittings is available.
Construction
Made from 14-gauge G-90 Galvanized Steel. The Wall duct comes with a single full-size cover fastened with screws. Flush covers are sized a minimum of 3⁄4” on each side. Dividers are available welded or supplied separately.
Accessories
Accessories available include 90° elbows, 45° elbows, T’s, crosses, and dividers for all sizes. Accessories are made from 14 gauge G-90 Galvanized Steel, Painted finish also available.
Finish
The standard finish is G-90 galvanized steel. A painted enamel finish is also available inside and out. Sherwin Williams ANSI-70, light-dove gray. (Available in other materials upon request).
Industry Standard
Meets National Electrical Manufacturers Association (NEMA) standard for Type 1 (General Purpose) enclosures.
Standard Sizes
Width | Height | Depth | Gauge |
---|---|---|---|
6 | 3 1/2 | 12 | 14 |
6 | 3 1/2 | 24 | 14 |
6 | 3 1/2 | 60 | 14 |
6 | 3 1/2 | 120 | 14 |
10 | 3 1/2 | 12 | 14 |
10 | 3 1/2 | 24 | 14 |
10 | 3 1/2 | 60 | 14 |
10 | 3 1/2 | 120 | 14 |
12 | 3 1/2 | 12 | 14 |
12 | 3 1/2 | 24 | 14 |
12 | 3 1/2 | 60 | 14 |
12 | 3 1/2 | 120 | 14 |
18 | 3 1/2 | 12 | 14 |
18 | 3 1/2 | 24 | 14 |
18 | 3 1/2 | 60 | 14 |
18 | 3 1/2 | 120 | 14 |