PRODUCTS

NEMA 1 Enclosures

NEMA 1 Hinge Cover Enclosure

Description

OVERVIEW

Application

EPI NEMA Type 1 Hinge Cover Enclosures are used for control cabinets and instrument cases in areas that do not require protection from rain, snow, or sleet. Typically used indoors only.

Construction

Made from 16 or 14-gauge steel. The covers have a continuous stainless steel hinge. Optional hardware: cylinder lock, latch, and hasp for padlocking. Panels must be ordered separately.

Finish

The standard finish is G-90 galvanized steel. A Sherwin Williams ANSI-70, light-dove gray painted enamel finish inside and out is also available.

Industry Standard

Meets National Electrical Manufacturers Association (NEMA) standard for Type 1 (General Purpose) enclosures.

Sizes
Width Height Depth Gauge
4 4 4 16
4 6 4 16
6 6 4 16
6 8 4 16
6 12 4 16
8 8 4 16
8 12 4 16
10 10 4 16
12 12 4 16
12 18 4 16
12 24 4 16
18 18 4 16
18 24 4 16
18 30 4 16
24 24 4 14
24 30 4 14
6 6 6 16
6 8 6 16
6 12 6 16
8 8 6 16
8 12 6 16
10 10 6 16
10 12 6 16
12 12 6 16
12 24 6 16
18 18 6 16
18 24 6 16
18 30 6 16
24 24 6 14
24 36 6 14
10 10 8 16
12 12 8 16
12 18 8 16
12 24 8 16
18 18 8 16
18 24 8 16
24 24 8 14
24 30 8 14
30 36 8 14
12 12 10 16
12 18 10 16
18 18 10 16
18 24 10 16
24 24 10 14
24 30 10 16
12 12 12 16
12 18 12 16
12 24 12 16
18 18 12 16
18 24 12 16
18 30 12 16
24 24 12 14
24 30 12 14
24 36 12 14
30 30 12 14
30 36 12 14
36 36 12 14
Resources

TECHNICAL SHEETS

NEMA 1 Hinge Cover Enclosure

NEMA 1 Hinge Cover Enclosure