PRODUCTS

NEMA Type 4 Galvanized Wall Mount Enclosure

PRODUCT OVERVIEW


Application

EPI NEMA Type 4 Enclosures are designed to house electrical controls, terminals, and instruments in areas, which are regularly hosed down or are very wet environments.

 

Construction 

ade from 14 or 12-gauge galvanized steel. All seams are continuously welded. There are no holes or knockouts. A lip is provided on three sides of the door, increasing strength and preventing dirt and liquids from dropping into the enclosure. The neoprene door gasket is attached with oil-resistant adhesive. The door clamps are quick and easy to operate, and have no loose parts. Exterior clamps, clamp screws, and hinge-pin are stainless steel. A hasp and staple are provided for padlocking. Body stiffeners and door stiffeners are provided in larger enclosures for extra rigidity. External feet are provided for mounting.

Accessories

Panels must be ordered separately. Floor stand kits in 6, 12, 18, and 24-inch heights are available for factory installation on all NEMA 4 enclosures. Drip shield kits protect the door hardware from dripping water and settling dust.

Finish

The standard finish is G90 Galvanized Steel inside and out. Other finishes are available for specific application.

Industry Standard

These enclosures meet the National Electrical Manufacturers Association (NEMA) standard for Type 4 (Industrial Use) enclosures.


Standard Sizes

Width Height Depth Gauge
12 16 6 14
16 16 6 14
16 20 6 14
16 24 6 14
20 20 6 14
20 24 6 14
20 30 6 14
24 24 6 14
24 30 6 14
24 36 6 12
12 16 8 14
16 20 8 14
20 20 8 14
20 24 8 14
20 30 8 14
24 30 8 14
24 36 8 12
30 30 8 12
30 36 8 12
30 42 8 12
16 20 10 14
20 24 10 14
24 30 10 12
30 36 10 12
30 48 10 12
36 48 10 12
36 60 10 12
16 20 12 14
20 24 12 14
24 24 12 14
24 30 12 14
24 36 12 12
30 30 12 14
30 36 12 12
30 42 12 12
30 72 12 12
36 36 12 12
36 42 12 12
36 48 12 12
30 36 16 12
36 48 16 12