PRODUCTS

NEMA 12 JIC Wireways

NEMA 12 JIC Hinge Cover Flanged Lay-in Wireway




Description

OVERVIEW

Application

EPI NEMA Type 12 JIC Flanged Hinge Cover, Lay- in Wireway is designed to protect electrical wiring from dust, dirt, oil, and water. This design allows for wire and cable to be installed by “laying-in” rather than by pulling through the wire.

Construction

Made from 16 or 14-gauge steel. End Flanges are made from 12-gauge steel. All seams are continuously welded and there are no holes or knockouts. All sections and ings have smooth rounded edges to prevent damage to insulation. The covers have neoprene gaskets a ached with oil-resistant adhesive. Heavy bu hinges and external screw clamps insure a complete seal between the covers and bodies. A solid Oil-resistant gasket is positioned when sections and ings are bolted together. 

Finish

The standard finish is Sherwin Williams ANSI-70 light dove gray enamel inside and out. Clamps and screws are stainless steel.

Industry Standard

Meets National Electrical Manufacturers Association (NEMA) standard for Type 12 (Industrial Use) and Type 13 (Oil tight and dust tight) enclosures. Also, conforms to the Joint Industrial Council (JIC) standard EGP-1-1967. 

Sizes

Custom sizes are available.

Width Height Depth Gauge
4 4 12 16
4 4 24 16
4 4 36 16
4 4 48 16
4 4 60 16
4 4 72 16
4 4 96 16
4 4 120 16
6 6 12 16
6 6 24 16
6 6 36 16
6 6 48 16
6 6 60 16
6 6 72 16
6 6 96 16
6 6 120 16
8 8 12 14
8 8 24 14
8 8 36 14
8 8 48 14
8 8 60 14
8 8 72 14
8 8 96 14
8 8 120 14
10 10 12 14
10 10 24 14
10 10 36 14
10 10 48 14
10 10 60 14
10 10 72 14
10 10 96 14
10 10 120 14
Resources

TECHNICAL SHEETS

NEMA 12 Hinge Cover Flanged Lay-in Wireway