Products

ENCLOSURES

EPI provides NEMA TYPE ENCLOSURES: NEMA1 Enclosures, NEMA 3R Enclosures, NEMA 4 Enclosures, NEMA 4X Enclosures and NEMA 12 Enclosures.

NEMA Type 1 Enclosures are designed for use as junction and pull boxes. These enclosures are used in areas which do not require protection against falling rain, snow, and sleet. These enclosures are available in several hundred sizes in Screw Cover, Hinge Cover, and Single or Double Door. Many types of hardware and finishes are available.

NEMA Type 3r Enclosures are designed to protect the enclosed equipment and wiring installations against rain, sleet and snow. These enclosures are available in Screw Cove, Hinge Cover, Double Door Enclosures, and in various finishes. Enclosures are also available in several hundred sizes. We can also install various types of hardware.

NEMA Type 4, 4x and JIC Stainless Steel Electrical Enclosures are designed to house electrical controls, terminals, and instruments in areas which may be regularly hosed down or are otherwise very wet. These Enclosures are used in areas where serious corrosion problems exist. Suitable for use outdoors, or in dairies, breweries, petrochemicals plants, sewage plants, and food processing plants, and food processing plants. These Enclosures are available in Single or Double Wall Mount, Freestanding, and Floor Mount.

NEMA Type 12 and JIC Enclosures are designed to house INDOOR electrical controls, terminals, and instruments. They provide protection from dust, dirt, oil, and water. NEMA Type 12 Enclosures are available in Single and Double Door Wall Mount, Free Standing, and Floor-Mount Enclosures, Consolettes and Free-Standing Consoles are available.



WIREWAY

EPI provides NEMA Type Wireway: NEMA 1 Wireway, NEMA 3R Wireway, NEMA 4 Wireway, NEMA 4X Wireway, NEMA 12 Wirewayand NEMA 3R Bus Wireway.


NEMA Type 1 Screw-Cover and Hinge-Cover Wireway are designated to house electrical wiring in installations where dirt, oil, and water are not  serious problems.  All sections and fittings can be laid in along an entire wireway run.  A complete selection of sections and fittings is available.



BUS SECONDARY

EPI provides NEMA Type Bus Secondary: NEMA TYPE 3R Bus Wireway, NEMA TYPE 3R Bus Enclosure and NEMA TYPE 3R Bus Weatherhead.

NEMA 3R Padmounted Secondary Bus Enclosures are designed to allow distribution of large amounts of low voltage power.  Ampacity ranges from 600 to 4000 amperes, rated at 600 volts.  (Single or three phase designs available).


NEMA TYPE 3r Secondary Bus Wireways are designed to allow distribution of large amounts of low voltage power.  Ampacity ranges from 600 to 4000 amperes, rated at 600 volts.  (Single or three phase designs available).