Nema Type 4x Single Door, Floor Mount, Stainless Steel Enclosures

Nema Type 4x Single Door, Floor Mount, Stainless Steel Enclosures


EPI NEMA Type 4x Single Door, Floor Mount, Stainless Steel Enclosures are designed to house electrical controls, terminals, and instruments in areas, which may be regularly hosed down or are used in areas where serious corrosion problems exist. Suitable for use outdoors, or in dairies, breweries, petro-chemical plants, sewage plants, food processing areas, packing plants, and similar installations.


Made from 14, 12, and 10 gauge stainless steel (Type 304 2B) and have strong and rigid construction. All seams are continuously welded. There are no holes or knockouts. A lip is provided on all three sides of the door, preventing dirt and liquid from dropping into the enclosure. Stainless steel door clamps are provided on three sides of door to insure a watertight seal with oil resistant gaskets. A heavy gauge stainless steel continuous hinge supports door. A hasp and staple are provided on door for padlocking. Each enclosure has 12 inch floor mount.


These enclosures are unpainted. Door fronts are ground smooth. Optional 316 2B Stainless Steel is available.


Panels must be ordered separately as they are not provided with the enclosures. Panels are available in stainless steel, aluminum, and painted steel. Floor stand kits in 6, 12, 18, and 24 inch heights are available for factory installation on all single door NEMA 4x enclosures.


Meets National Electrical Manufacturers Association (NEMA) standard for Type 4 (Water Tight and Dust Tight), Type 4x (Water Tight, Dust Tight, and Corrosion Resistant), Type 3 (Dust Tight, Rain Tight, and Sleet-Ice Resistant), Type 12 (Oil Tight and Dust Tight), and Type 13 (Industrial Use) enclosures. Also conforms to Joint Industrial Council (JIC) standard EGP-1-1967. UL50.

Click on printer for print friendly version: Print report

Standard Sizes

Click Custom button to specify non-standard size.Custom size

Item Code=3005