Nema Type 4 Aluminum Wall Mount Enclosures

Nema Type 4 Aluminum Wall Mount Enclosures

Application

EPI NEMA Type 4 Aluminum Enclosures are designed to house electrical controls, terminals, and instruments in areas, which are regularly hosed down, or are very wet environments.

Construction

These enclosures are made from .125 5052H Quarter Hard Aluminum sheets. There are no holes or knockouts. A lip is provided on three sides of the door, increasing strength and preventing dirt and liquids from dropping into the enclosure. The neoprene door gasket is attached with oil resistant adhesive. The door clamps are quick and easy to operate, and have no loose parts. Exterior clamps, clamp screws, and hinge pin are stainless steel. A hasp and staple are provided for padlocking. Body stiffeners and door stiffeners are provided in larger enclosures for extra rigidity. External feet are provided for mounting.

Finish

The standard finish is 5052H Quarter Hard Aluminum Sheets.

Accessories

Panels must be ordered separately as they are not furnished. Floor stand kits in 6, 12, 18, and 24-inch heights are available for factory installation on all single door NEMA 4 enclosures. Drip shield kits protect the door hardware from dripping water and settling dust.

Standards

These enclosures meet the National Electrical Manufacturers Association (NEMA) standard for Type 4 (Industrial Use) enclosures. UL50.

Click on printer for print friendly version: Print report

Standard Sizes

Click Custom button to specify non-standard size.Custom size
WidthHeightDepthWidthHeightDepth
1216630248
1224630308
1616630368
1620630428
1624636428
2016636488
2020636608
20246162010
20306202410
24246243010
24306303610
24366304810
12168364810
16208366010
20208243012
20248303612
20308364812
24208303616
24248364816
24308366016
24368

Item Code=3000