NEMA 12 JIC, Flanged Hinge Cover, Lay-in WireWay

NEMA 12 JIC, Flanged Hinge Cover, Lay-in WireWay

Application

EPI NEMA Type 12 JIC, Flanged Hinge-Cover, Lay-in Wireway is designed to protect electrical wiring from dust, dirt, oil, and water. This design allows for wire and cable to be installed by “laying-in” rather than by pulling through the wire. A complete selection of sections and fittings is available in 2½ x 2½ 4x4, 6x6, 8x8, 10x10, and 12x12 sizes.

Construction

Made from 16 and 14 gauge steel. The end flanges are made from 12 gauge steel. All seams are continuously welded and there are no holes or knockouts. All sections and fittings have smooth rounded edges to prevent damage to insulation. The covers have neoprene gaskets attached with oil-resistant adhesive. Heavy butt hinges and external screw clamps insure a complete seal between the covers and bodies. A solid oil-resistant gasket is positioned when sections and fittings are bolted together.

Finish

The standard finish is ANSI-70 light dove gray enamel inside and out. Clamps and screws are stainless steel. Additional finishes can be provided.

Standards

Conforms to the National Electrical Manufacturers Association (NEMA) standard of Type 12 (Industrial Use) and Type 13 (Oil tight and dust tight) enclosures. Also conforms to the Joint Industrial Council (JIC) EGP-1-1967. UL870

Click on printer for print friendly version: Print report

Standard Sizes

Click Custom button to specify non-standard size.Custom size
WidthDepthLengthWidthDepthLength
-440-880
440880
440880
440880
440880
440880
440880
440880
440880
440880
44128812
44248824
44368836
44488848
44608860
44728872
44968896
4412088120
-660-10100
66010100
66010100
66010100
66010100
66010100
66010100
66010100
66010100
66010100
6612101012
6624101024
6636101036
6648101048
6660101060
6672101072
6696101096
661201010120

Item Code=1057