Nema 4x JIC Stainless Steel Continuous Hinge Clamp Cover Enclosure

Nema 4x JIC Stainless Steel Continuous Hinge Clamp Cover Enclosure

Application

EPI NEMA Type 4x Stainless Steel JIC, Continuous Hinge Clamp Cover Enclosures are designed for use in areas which may be regularly hosed down or are otherwise very wet. They are suitable for use in dairies, breweries, and similar installations. They are also designed for use in areas where serious corrosion problems exist.

Construction

Made from 16 & 14 gauge stainless steel (Type 304 2B). They have external screw clamps on three sides of the cover. The screw clamps are quick and easy to operate. The neoprene gasket is attached to the cover with oil-resistant adhesive. All seams are continuously welded and there are no holes or knockouts. External feet are furnished for mounting.

Finish

The standard finish is Type 304 2B stainless steel. Optional 316 2B Stainless Steel is available.

Accessories

Panels must be ordered separately as they are not furnished with the enclosures. Provisions for padlocking and other type hardware can be provided if specified. Stainless steel panels are available.

Standards

Meets National Electrical Manufacturers Association (NEMA) standard for Type 4 (Water Tight and Dust Tight) and Type 4x (Water Tight, Dust Tight and Corrosion Resistant). Also conforms to Joint Industrial Council (JIC) standard EGP-1-1967. UL50.

Click on printer for print friendly version: Print report

Standard Sizes

Click Custom button to specify non-standard size.Custom size
WidthHeightDepthWidthHeightDepth
4438104
46310125
683.512146
66414166

Item Code=1031