NEMA 4 JIC, Continuous Hinge Clamp Cover Enclosure

NEMA 4 JIC, Continuous Hinge Clamp Cover Enclosure

Application

EPI NEMA Type 4 JIC, Continuous Hinge Clamp Cover Enclosures are designed for use in areas which may be regularly hosed down or are otherwise very wet. They are suitable for use in dairies, breweries, and similar installations.

Construction

Made from 16 and 14 gauge steel. There are no knockouts or holes. External screw clamps are provided on three sides of the cover for securing the gasketed cover. The screw clamps and clamp screws are made of stainless steel and are quick and easy to operate. There are no loose parts. A continuous hinge is provided. External feet are furnished for mounting.

Finish

The standard finish is ANSI-70 light dove gray enamel inside and out. Additional finishes can be provided.

Accessories

Panels must be ordered separately, as they are not furnished with the enclosures. Provisions for padlocking and other hardware can be provided if specified.

Standards

Meets National Electrical Manufacturers Association (NEMA) standard for Type 4 (Water Tight and Dust Tight), Type 12 (Industrial Use) and Type 13 (Oil Tight and Dust Tight) enclosures. Also conforms to the Joint Industrial Council (JIC) standard EGP-1-1967. UL50.

Click on printer for print friendly version: Print report

Standard Sizes

Click Custom button to specify non-standard size.Custom size
WidthHeightDepthWidthHeightDepth
44310125
4638106
683.512126
66412146
810414166

Item Code=1028