Nema Type 12 Single Door Free Standing Enclosure

Nema Type 12 Single Door Free Standing Enclosure

Application

EPI NEMA Type 12 Single Door, Free Standing Enclosures are designed to house electrical controls, terminals, and instruments. They provide protection from dust, oil and water. Enclosures are extra deep for applications where added interior space is needed.

Construction

Made from 14, 12, or 10 gauge steel. All seams are continuously welded. There are no holes or knockouts. The neoprene door gasket is attached with oil-resistant adhesive. A T-handle mechanism can be provided with key-locking or padlocking features. A 3-point latching device holds the door securely closed. Heavy gauge continuous hinges support each door. Two door enclosures may be provided with stiffeners welded to the back to maintain flatness and increase rigidity. Mounting brackets are provided for optional mounting panel, otherwise not installed.

Finish

The standard finish is ANSI-70 light dove gray inside and out. Panels are the same.

Accessories

Panels must be ordered separately as they are not provided with the enclosure. Regular panels, side panels, and panel supports are available. Floor stand kits are available for factory installation on enclosures. Drip shield kits protect the door and the door hardware from dripping water and settling dust.

Standards

Meets National Electrical Manufacturers Association (NEMA) standard for Type 12 (Industrial Use) enclosures. UL50.

Click on printer for print friendly version: Print report

Standard Sizes

Click Custom button to specify non-standard size.Custom size
WidthHeightDepthWidthHeightDepth
246018366024
247218367224
307218369024
367218247230
249020367230
369020247236
247224367236
307224369036

Item Code=1019