Nema Type 12 Double Door Wall Mounted Enclosure

Nema Type 12 Double Door Wall Mounted Enclosure

Application

EPI NEMA Type 12 Double Door Wall Mounted Enclosures are designed to house electrical controls, terminals, and instruments. They provide protection from dust, dirt, oil, and water.

Construction

Made from 14, 12, or 10 gauge steel. All seams are continuously welded. There are no holes or knockouts. The neoprene door gasket is attached with oil-resistant adhesive. These enclosures have uniquely gasketed, overlapping doors which eliminate the need for a center post. A 3-point latching mechanism, operated by an oil tight locking handle, holds the doors securely closed. Heavy gauge continuous hinges support each door. Body stiffeners and door stiffeners are provided in larger enclosures for extra rigidity. Six external feet are furnished for mounting. Mounting brackets are provided for optional mounting panel, otherwise, not installed.

Finish

The standard finish is ANSI-70 light dove gray inside and out. Panels are the same.

Accessories

Panels must be ordered separately as they are not furnished. Floor stand kits in 6, 12, 18, and 24 inch heights are available for factory installation. Drip shield kits protect the door and the door hardware from dripping water and settling dust.

Standards

Meets National Electrical Manufacturers Association (NEMA) standard for Type 12 (Industrial Use) enclosures. Also conforms to Joint Industrial Council (JIC) standard EGP-1-1967. UL50.

Click on printer for print friendly version: Print report

Standard Sizes

Click Custom button to specify non-standard size.Custom size
WidthHeightDepthWidthHeightDepth
42248424212
48248483612
423010484212
483010484812
603010603612
423612604212

Item Code=1018