ApplicationEPI Nema Type 4, Double Door, Free Standing Enclosures are designed to house electrical controls, terminals, and instruments in areas, which may be regularly hosed down or are in wet areas. Suitable for use outdoors, dairies, breweries, and similar installations.
ConstructionMade 14, 12, and 10 gauge steel. All seams are continuously welded. There are no holes or knockouts. A lip is provided on all three sides of the door preventing dirt and liquid from dropping into the enclosure. Clamps are provided on three sides of the door to insure a watertight seal with oil resistant neoprene gaskets. All exterior hardware (such as clamps, clamp screws, hinge pins, etc.) is stainless steel. A heavy gauge, continuous hinge supports each door. A hasp and staple are provided on each door for padlocking.
FinishThe standard finish is ANSI-70, light dove gray enamel finish inside and out. Other finishes are available for specific applications.
AccessoriesPanels must be ordered separately as they are not furnished.
StandardsConforms to the National Electrical Manufacturers Association (NEMA) standard for Type 4 (Watertight and Dust-tight). Type 3 (Dust-Tight, Rain tight, and Sleet-Ice Resistant), Type 13 (Industrial use) enclosures. UL50
Click on printer for print friendly version: