Nema Type 1 Hinge Cover Enclosures

Nema Type 1 Hinge Cover Enclosures

Application

EPI NEMA Type 1 Hinge Cover Enclosures are designed for use as control cabinets and instrument cases in areas that do not require oil tight and dust tight characteristics.

Construction

Made from 18, 16, or 14 gauge steel. The covers have continuous hinges and are held closed by an optional flush paddle latch. Optional hardware: cylinder lock and hasp for padlocking. Optional Hinges: Removable Hinges

Finish

The standard finish is G-90 galvanized steel. An ANSI-70 light-dove gray painted enamel finish is also available inside and out

Accessories

Panels may be ordered seperately. KO's can be provided on 4" and 6" deep only.

Standards

Meets National Electrical Manufacturers Association (NEMA) standard for Type 1 (General Purpose) enclosures.

Click on printer for print friendly version: Print report

Standard Sizes

Click Custom button to specify non-standard size.Custom size
WidthHeightDepthWidthHeightDepth
66430486
68412128
88412148
810412168
1010412208
1012420208
1212420248
1214420308
68624248
810624308
1010624368
1012624428
1212630368
1214636368
1216636428
1220636488
12246202410
16166243010
16206303610
16246304210
20206364210
20246364810
20306242412
24246243012
24306303612
24366304212
30306364212
30366364812
30426

Item Code=1001